Amod A. Ogale, Ph.D. -- Publications

Refereed Journal Publications (* denotes corresponding author)

S. Kundu and A. A. Ogale*, “Rheostructural Studies on a mesophase pitch during transient shear flow”, Carbon, 44, 2224-35, 2006

Young Rack Ahn; Young Seak Lee; A. A Ogale; Chang Hun Yun; Chong Rae Park*, “Compressional Behavior of Carbon Nanotube Reinforced Mesophase Pitch-based Carbon Fibers”, Fibers and Polymers, 7(10), 85-87, 2006

R. A Walker, A. K Naskar, and A. A Ogale*, “Carbon Mats from Melt-Spun Polyacrylonitrile-Based Precursors for Automotive Composites”, J. Plastics, Rubber, and Composites, 35 (6/7), 242-46, 2006

T. Mukundan, V. A. Bhanu, K. B. Wiles, H. Johnson, M. Bortner, D. G. Baird, A. K. Naskar, A. A. Ogale, D. D. Edie, and J. E. McGrath*, “A photocrosslinkable melt processible acrylonitrile terpolymer as carbon fiber precursor”, Polymer, 47, 4163-4171, 2006

T. Guo, A. K. Naskar, G. M. Harrison, and A. A. Ogale*, “Thermal and shear flow effects on microstructure of a thermotropic liquid crystalline polymer”, Polymer Engineering & Science, 46(9), 1215-22, 2006

S. Lee, M-S Kim, A. K. Naskar and A. A. Ogale*, "Effect of carbon nanofibers on the anisotropy of an aromatic thermotropic liquid crystalline polymer", Polymer, 46, 2663-67, 2005

A. K Naskar, R. A. Walker, S. Proulx, D. D. Edie and A. A. Ogale*, "UV assisted stabilization routes for carbon fiber precursors produced from melt-processible polyacrylonitrile terpolymer", Carbon, 43 (5), 1065-1072, 2005.

T. Guo, G. M. Harrison, and A. A. Ogale*, "Transient shear rheology and rheo-optical microstructural characterization of a thermotropic liquid crystalline polymer", Polymer Engineering & Science, 45(2), 187-97, 2005

D. R. Bosak, A. A. Ogale*, and J. Van Dun, "Bicomponent fibers derived from immiscible polymer blends", Textile Research Journal, 75(1), 50-56, 2005

S. S. Cherukupalli and A. A. Ogale*, "Real-time Raman spectroscopic measurement of crystallization kinetics and its effect on the morphology and properties of polyolefin blown films", J. Appl. Polym. Sci., accepted

S. S. Cherukupalli and A. A. Ogale*, "Integrated experimental-modeling study of microstructural development and kinematics in a blown film extrusion process: I. Real-time Raman spectroscopy measurements of crystallinity", J. Macromolecular Eng., accepted

L.K. Henrichsen, A. J. McHugh*, S. S. Cherukupalli and A. A. Ogale, "Microstructure and kinematic aspects of blown film extrusion process: II. Numerical modeling and prediction of LLDPE and LDPE", J. Macromolecular Eng., accepted

S. Cherukupalli and A. A. Ogale*, "Online measurements of crystallinity using Raman spectroscopy during blown film extrusion of a linear low-density polyethylene", Polymer Engineering & Science, 44(8), 1484-90, 2004.

K. McLain and A. A. Ogale*, "Interdiffusion of thermotropic liquid crystalline and thermoplastic polyesters", J. Advanced Materials, 36, 51-55, 2004

K. Smith, A. A. Ogale*, R. Maugans, L. K. Walsh, and R. Patel, "The effects of bond roll pattern and temperature on the microstructure and properties of polyethylene nonwovens", Textiles Research Journal, 73(10), 845-53, 2003

T. Cho, Y. S. Lee, R. Rao, A.M. Rao, D. D. Edie, and A. A. Ogale*, "Structure of carbon fiber obtained from nanotube-reinforced mesophase pitch", Carbon, 41(7), 1419-24, 2003

L. M. Manocha, A. Warrier, S. Manocha, D. D. Edie, and A. A. Ogale*, "Microstructure of carbon/carbon composites reinforced with pitch-based ribbon-shape carbon fibers", Carbon, 41(7), 1425-36, 2003

M. C. Paiva, P. Kotasthane, D. D. Edie, and A. A. Ogale*, "UV stabilization route for melt-processible pan-based carbon fibers", Carbon, 41(7), 1399-1409, 2003

D. Cribbs and A. A. Ogale*, "Hydrolytic degradation of nylon 66 pile carpet fibers", Textile Research Journal, 73(2), 98-104, 2003

M. E. Moore, I. Y. Han, J. C. Acton, A. A. Ogale, C. R. Barmore, P. L. Dawson*, "Effects of antioxidants in polyethylene film", J. Food Sci., 68(1), 99-104, 2003

T. Renault and A. A. Ogale*, "Unsteady-state modeling of transverse wetting of fibers by photoresins", J. Advanced Materials, 35(2), 46-50, 2003.

A. A. Ogale*, D. P. Anderson, C. Lin, and K. Kearns, "Orientation and dimensional changes in meophase pitch-based carbon fibers", Carbon, 40(8), 1309-19, 2002

A. Gupta and A. A. Ogale*, "Dual curing of carbon fiber reinforced photoresins for rapid protototyping", Polymer Composites, 23(6), 1162-70, 2002

H. V. Pol, P. L. Dawson, J. C. Acton, and A. A. Ogale*, "Soy protein isolate/corn zein laminated films: transport and mechanical properties", Journal of Food Science, 67(1), 212-217, 2002

T. Renault and A. A. Ogale*, "Capillary wetting of fibers tows by photoresin in composite photolithography", Journal of Advanced Materials, 34(2), 3-10, 2001

P. Cunningham, A. A. Ogale*, P. L. Dawson, and J. C. Acton, "Tensile properties of soy protein isolate films produced by a thermal compaction technique", Journal of Food Science, 65(4), 668-71, 2000

A. A. Ogale*, P. Cunningham, P. L. Dawson, and J. C. Acton, "Viscoelastic, thermal, and microstructural characterization of soy protein isolate films", Journal of Food Science, 65(4), 672-79, 2000.

M. Deng, R. A. Latour, A. A. Ogale, and S. W. Shalaby*, "A study of creep properties of ultrahigh molecular weight polyethylene systems," Journal of Biomedical Materials Research, 40, 214-22, 1998

A. Dani and A. A. Ogale*, "Percolation in short-fiber composites: cluster statistics and critical exponents," composites science and technology, 57, 1355-61, 1997

T. Renault and A. A. Ogale*, "Photo dynamic mechanical analysis for cure monitoring of fiber reinforced photoresin composites," J. Advanced Materials, 28(1), 42-47, 1996

T. Renault, A. A. Ogale*, R. Charan, and A. Bagchi, "Selective Reinforcement of Photoresins with Continuous Fibers Using 3-D Composite Photolithography," J. Advanced Materials, 27(4), 8-12, 1996

A. Dani and A. A. Ogale*, "Electrical Percolation Behavior of Short Fiber Composites: Experimental Characterization and Modeling," Composites Science and Technology, 56, 911-920, 1996

T. Renault, A. A. Ogale*, and M. J. Drews, "Cure Monitoring of Photosensitive Resins by Photo Dynamic Mechanical Analysis," Polymer Engineering and Science, 36(4), 551-57, 1996

C. Rodeffer, A. Maybach, and A. A. Ogale*, "Influence of Thermal Aging on the Transverse Tensile Creep Response of a Carbon Fiber/Thermoplastic Polyimide Composite," J. Advanced Materials, 27(2), 46-51, 1996

M. Crowder, A. A. Ogale*, E. R. Moore, and B. Dalke, "Interrelationship of Strength and Flow of Polystyrene," Polymer Engineering and Science, 34 (19), 1497-1506, 1994

J. Townsend and A. A. Ogale*, "Processing and Characterization of Honeycombs Fabricated by Sterolithography," Journal of Advanced Materials, 25 (4), 13-20, 1994

M. A. Wait, J. Mavoori, R. Singh*, and A. A. Ogale, "The Effects of Dual Spectral Sources on the Curing of Polyimide Films by Rapid Isothermal Processing," Applied Physics Letters, 64 (24), 3234-36, 1994

A. A. Ogale* and S. F. Wang, "Simulation of Electrical Percolation Behavior of Quasi- and Transversely Isotropic Short Fiber Composites," Composites Science and Technology, 46, 379-88, 1993

S. F. Wang and A. A. Ogale*, "Continuum Space Simulation of Electrical Percolation Behavior of Anisotropic Short Fiber Composites in Cubic and Non-Cubic Control Volumes," Composites Science and Technology, 46, 389-98, 1993

S. F. Wang and A. A. Ogale*, "Continuum Space Simulation and Experimental Characterization of Electrical Percolation Behavior of Particulate Composites," Composites Science and Technology, 46, 93-103, 1992

D. H. Nguyen and A. A. Ogale*, "Physical Aging of Polyetheretherketone: Characterized by Creep Tests in Compressive and Flexural Modes," Journal of Thermoplastic Composites, 4, 72-82, 1991

D. H. Nguyen and A. A. Ogale*, "Compressive and Flexural Creep Behavior of Carbon Fiber/ Polyetheretherketone Composites," Journal of Thermoplastic Composites, 4, 83-99, 1991

T. Renault, A. A. Ogale*, R. L. Dooley, A. Bagchi and C. C. Jara-Almonte, "Photolithography for Composites Manufacturing: Continuous Glass Fiber/ Polyacrylate Composites," SAMPE Quarterly, 22 (2), 19-25, 1991

A. J. Schaff and A. A. Ogale*, "Viscoelastic Properties of a Nonwoven Polypropylene Fabric," Textile Research Journal, 61(7), 386-92, 1991

A. A. Ogale*, T. Renault, R. L. Dooley, A. Bagchi and C. C. Jara-Almonte, "Photolithography for Composites Development: Discontinuous Reinforcements," SAMPE Quarterly, 23 (1), 28-38, 1991

S. F. Wang and A. A. Ogale*, "Structural Foam Molding: Modeling of Bubble-Growth Process Resulting from Chemical Blowing Agents," Polymer-Plastics Technology and Engineering Journal, 29(4), 355-69, 1990

S. F. Wang and A. A. Ogale*, "Influence of Aging on Transient and Dynamic Mechanical Properties of Carbon Fiber/Epoxy composites," SAMPE Quarterly, 20, 9-13, 1989

S. F. Wang and A. A. Ogale*, Effects of Physical Aging on Dynamic Mechanical and Transient Properties of Polyetheretherketone," Polymer Engineering and Science, 29(18), 1273-78, 1989

A. A. Ogale and R. L. McCullough*, "Physical Aging Characteristics of Polyetheretherketone," Composites Science and Technology, 30, 137-48, 1987

A. A. Ogale and R. L. McCullough*, "Influence of Microstructure on Elastic and Viscoelastic Properties of Polyetheretherketone," Composites Science and Technology, 30, 185-201, 1987

A. A. Ogale*, "Depolymerization of Nylon 6: Some Kinetic Modeling Aspects," Journal of Applied Polymer Science, 29 (12), 3947-54, 1984

Conference Proceedings

A. K. Naskar, S. Proulx, R. A. Walker, and A. A. Ogale*, "Carbon Fibers from Novel Precursors: Melt-Processible PAN Terpolymers and UV-Assisted Stabilization Routes", Proc. of 11th European Conference on Composite Materials ECCM 11, pp. 396-397, Rodos, Greece (2004)

Gururajan, G., Cherukupalli, S., and Ogale*, A.A., "Real-time Structural Measurements in 3-Layer Blown Film," Proceedings of SPE ANTEC, 50 (1), 200 (2004)

Cherukupalli, S., and Ogale, A.A.*, "Effect of Crystallization Kinetics on the Morphology of Linear Low-Density Polyethylene Blown Films," Proceedings of SPE ANTEC, 50 (1), 220 (2004)

Gururajan, G., Jerrim, L., Long, M., and Ogale, A. A., "Continuous Extrusion of Proteinaceous Polymers," Proceedings of SPE ANTEC, 50 (3), 3293 (2004)
Guo, T., Harrison, G., and Ogale, A.A., "The Effect of Texture on the Shear Rheology of a Thermotropic Liquid Crystalline Polymer," Proceedings of SPE ANTEC, 50 (2), 996 (2004)

Lee, S., Kim, M-S., and Ogale, A.A., "Electrical Properties of Carbon Nanofiber-Modified Thermotropic Liquid Crystalline Polymers," Proceedings of SPE ANTEC, 50 (2), 1652 (2004)

S. Cherukupalli and A. A. Ogale, "Online Study of Microstructure Evolution during Blown Film Extrusion of Polyolefins using Raman Spctroscopy", Proc. 8th Japan Intl. SAMPE Symposium, Vol. 1, pp. 345-48, Nov 18-21, 2003, Tokyo, Japan

P. Kotasthane, A. K. Naskar, D. D. Edie, and A. A. Ogale*, "Advanced UV Stabilization Routes for Carbon Fibers Produced from Melt-Processible PAN Terpolymers", Advancing with Composites 2003, I. C. Visconti, Ed., pp. 347-52, Milan, Italy, 2003

S. Cherukupalli and A. A. Ogale, "Real-time Estimation of Crystallization Half Time during Blown Film Extrusion and its Influence on the Final Film Properties", Proceedings of the SPE Annual Technical Conference, 49 (1), pp. 39-43, 2003

T. Guo, G. M. Harrison, and A. A. Ogale, "Microstructure evolution during flow startup of a thermotropic liquid crystalline copolyester," Proceedings of the SPE Annual Technical Conference, pp. 928-932, 2003

M. C. Paiva, P. Kotasthane, D. D. Edie, and A. A. Ogale, "UV Stabilization Route for Melt-Processible PAN-based Carbon Fibers", Proc. Korea-US International Seminar, pp. 138-46, Jeju Island, S. Korea, September 12-13, 2002

S. Cherukupalli, Ogale, A.A., Henrichsen, L.K., and McHugh, A.J., "Real-time Measurements and Modeling of Microstructure in Blown Film Extrusion of a Linear Low-Density Polyethylene," Proceedings of the 18th Annual meeting of the Polymer Processing Society, 302, pp. 1-7, Guimarães, Portugal, 2002

S. Cherukupalli, R. Paradkar, A. A. Ogale, L. Henrichsen, and A. J. McHugh, "Online Measurements and Heat Transfer Issues in Blown Film Extrusion", Proceedings of the SPE Annual Technical Conference, Vol. 3, pp. 3435-3440, 2002

T. Guo, G. Harrison, and A. A. Ogale, "Rheology and Microstructure of Thermotropic Liquid Crystalline Copolyesters", Proceedings of the SPE Annual Technical Conference, pp. 949-953, 2002

P. L. Dawson, J. C. Acton, and A. A. Ogale, "Biopolymer films and potential applications to meat and poultry products. Proc. Recip. Meat Conf. 55, pp. 75-81, 2002

L. M. Manocha, A. Warrier, S. Manocha, D. D. Edie, and A. A. Ogale, "Co-Graphitization of Fibers and Matrix in Carbon-Carbon Composites with Controlled Interfaces", Ceramics Science and Engineering Proceedings, Vol. 23 (3), pp. 347-54, 2002

M.C. Paiva, C. Lin, T. Haynie, P. Kotasthane, A. A. Ogale, J. M. Kennedy, D. D. Edie, J. McGrath and D. Baird, "Carbon Fibers from Alternative Precursors", Proc. of Carbon Conference, pp. 1-3, Lexington, KY, 2001

T. Guo, G. H. Harrison, and A. A. Ogale, "Rheological Behavior of Thermotropic Liquid Crystalline Copolyester Vectra A950", ANTEC 2001, Proceedings of the Annual Technical Conference, pp. 1154-58, Society of Plastics Engineers, Dallas, 2001

S. Cherukupalli, R. Jelen, and A. A. Ogale, "Measurements of Microstructural Variation in Blown Films", ANTEC 2001, Proceedings of the Annual Technical Conference, pp. 3369-73, Society of Plastics Engineers, Dallas, 2001

S. Kasliwal, A. A. Ogale, and D. Zumbrunnen, "Anisotropic Percolation due to Chaotic Mixing of Short Carbon Fibers and Low-Density Polyethylene", ANTEC 2001, Proceedings of the Annual Technical Conference, pp. 1359-63, Society of Plastics Engineers, Dallas, 2001

M. R. Kesterson, A. A. Ogale, and D. A. Bruce, "Property Prediction of Coronene and Mesophase Structures", EUROCARBON 2000, pp. 27-28, 1st World Conference on Carbon, Berlin, Germany, 2000

L. M. Manocha, S. Manocha, D. D. Edie, and A. A. Ogale, "Carbon/carbon Composites with Stabilized and Heat Treated Pitch Fibers", EUROCARBON 2000, pp. 521-22, 1st World Conference on Carbon, Berlin, Germany, 2000

H. V. Pol, A. A. Ogale, and P. L. Dawson, "Laminated Protein Films", ANTEC 2000, Proceedings of the Annual Technical Conference, pp. 1751-55, Society of Plastics Engineers, Orlando, 2000

Dawson, P. L., Ogale, A. A. and Acton, J. C. 2000. The status and potential for edible biodegradable packaging films. Proc. Intl. Cong. Meat Sci. Technol. 46:748-751

S. G. Kasliwal, A. A. Ogale, and D. A. Zumbrunnen, "Anisotropic Electrical Percolation and Electrostatic Dissipation in Chaotically Mixed Carbon Black Filled Polyethylene Composites", ANTEC 2000, Proceedings of the Annual Technical Conference, pp. 1418-22, Society of Plastics Engineers, Orlando, 2000

A. A. Ogale, D. P. Anderson, and K. M. Kearns, "Evolution of Microstructure in Pitch-Based Carbon Fibers During Heat Treatment", CARBON '99, pp. 488-89, 24th Biennial Conference on Carbon, Charleston, SC, 1999

T. Ferguson, C. Lin, D. D. Edie, A. A. Ogale, S. Manocha, and L. Manocha, "Single-Step Processing of Pitch-Based Carbon-Carbon Composites", CARBON '99, pp. 44-45, 24th Biennial Conference on Carbon, Charleston, SC, 1999

H. Pol, C. C. Cavin, A. A. Ogale, and P. L. Dawson, "Batch and Continuous Processing of Protein Films", ANTEC '99, Proceedings of the Annual Technical Conference, pp. 396-401, Society of Plastics Engineers, New York, 1999

R. Gnegy and A. A. Ogale, "High Thermal Conductivity Rapid Dies: Backfilled and Coated Dies", ANTEC '99, Proceedings of the Annual Technical Conference, pp. 1096-99, Society of Plastics Engineers, New York, 1999

T. S. Cheung and A. A. Ogale, "Processing of Multilayer Fiber Reinforced Composites by Three-Dimensional Photolithography," Proc. 1998 NSF Design and Manufacturing Grantees Conference, pp. 557-58, Monterrey, 1998

R. Gnegy and A. A. Ogale, "Enhanced Thermal Performance of Sterolithography Produced Rapid Injection Dies," Proc. ANTEC '98, pp.13548-51, Atlanta, 1998

D. Taft, A. A. Ogale, F. Paul, and E. Persall, "Silica Filled Resins for Rapid SLA Tools, "Solid Freeform Fabrication Proceedings, pp. 341-348, Austin, 1997

A. A. Ogale, J. McLaurin, C. Jinescu, C. Greer, "Free Form Fabrication of Carbon Fiber Reinforced Composites by Three-Dimensional Photolithography", Proc. 1997 NSF Design and Manufacturing Grantees Conference, pp. 283-84, Seattle, 1997

A. A. Ogale, T. Renault, and C. Greer, "3-Dimensional Photolithography," Proceedings of the 11th technical Conference on Composites, American Society for Composites, pp. 822-828, Atlanta, 1996

C. Greer, J. McLaurin, and A. A. Ogale, "Processing of Carbon Fiber Reinforced Composites by Three Dimensional Photolithography," Solid Freeform Fabrication Proceedings, pp. 307-311, Austin, 1996

R. I. Danescu, D. A. Zumbrunnen, and A. A. Ogale, "Assessment of Chaotic Mixing as a Means to Produce Electrically Conducting Polymer Composites with Metallic Powders," Proc. ANTEC '96, Proceedings of the Annual Technical Conference, Society of Plastics Engineers, Indianapolis, 1996

C. Rodeffer and A. A. Ogale, "Thermal Aging in a Thermoplastic Polyimide Composite" Proc. ANTEC '95, Boston, 1995, pp. 3075-76

A. A. Dani and A. A. Ogale, "Continuum Percolation in Short Fiber Composites: Monte Carlo Simulations, Cluster Statistics, and Fractal Growth," Proc. ANTEC '95, pp.1382-83, 1995

J. Paulk and A. A. Ogale, "Thermal Processing of Food Grade Proteins," Proc. ANTEC '95, Boston, 1995, pp. 3139-40

C. Jinescu and A. A. Ogale, "3-D Photolithography for Composites Processing," Proc. ANTEC '95, Boston, 1995, pp. 3050-51

A. Dani and A. A. Ogale, "Electrical Percolation in Short Fiber Composites," Proc. 26th International SAMPE Technical Conference, Atlanta, 1994, pp. 689-90

A. A. Ogale, T. Renault, R. Charan, and A. Bagchi, "Fabrication of Fiber Reinforced Plates with Curvilinear Layout by 3-D Photolithography," Proc. 26th International SAMPE Technical Conference, Atlanta, 1994, pp. 54-61

C. Rodeffer and A. A. Ogale, "Thermal Aging in a Carbon Fiber Reinforced Thermoplastic Polyimide," Proc. 9th Technical Conference, American Society for Composites, Newark, Delaware, 1994, pp. 1055-61

A. Dani and A. A. Ogale, "Percolation in Short Fiber Composites: Continuum Space Monte Carlo Simulations and Experimental Results," Proc. ANTEC '94, San Francisco, 1994

A. A. Ogale, R. Singh, R. J. Diefendorf, D. D. Edie, S. W. Shalaby, and H. Rack, "Team-Teaching and Crossing of Disciplinary Boundaries: Development of a Freshman Engineering Course," Proceedings of the 1994 ASEE Southeastern Section Annual Meeting, pp. 14-19 April 10-12, 1994, Greensboro, NC

T. Renault, A. A. Ogale, and M. J. Drews, "Influence of Reinforcements on Photocuring: Photo Dynamic Mechanical Analysis," Proc. ANTEC '93, New Orleans, 1993, pp. 2352-54

A. A. Dani and A. A. Ogale, "Electrical Resistivity of Short Fiber Composites," Proc. ANTEC '93, New Orleans, 1993, pp. 609-613

R. Charan, A. Bagchi, T. Renault, and A. A. Ogale, "Fabrication of Composite Prototypes by 3-D Photolithography," Proceedings of the 4th International Conference on Rapid Prototyping, pp.15-24, June 14-17, 1993

T. Renault and A. A. Ogale, "3-D Photolithography: Mechanical Properties of Glass and Quartz Fiber Composites," Proc. ANTEC '92, Detroit, May, 1992, pp. 745-47

A. A. Dani, S. F. Wang, and A. A. Ogale, "Electrical Percolation Behavior of Short Fiber Composites: Experimental Studies and Simulation Results," Proc. ANTEC '92, Detroit, May, 1992, pp. 481-83

A. A. Ogale, T. Renault, R. L. Dooley, A. Bagchi, and C. C. Jara-Almonte, "Processing of Composites by 3-D Photolithography: Transport Issues," Proc. First International Conference on Transport Phenomena in Processing, Honolulu, March, 1992

C. C. Jara-Almonte, A. Bagchi, A. A. Ogale and R. L. Dooley, "A Design Environment for Rapid Prototyping," Proc. ASME Winter Annual Meeting, November, 1990, Dallas, Texas

T. Renault, A. A. Ogale, R. L. Dooley, A. Bagchi and C. C. Jara-Almonte, "Photolithography for Composites Manufacturing," Proc. Fiber-Tex '90, The IVth Conference on Advanced Engineering Fibers and Textile Structures for Composites, August, 1990

A. Dani and A. A. Ogale, "Residual Damage Tolerance of Thermoplastics/Composites," Proc. ANTEC '90, Dallas, May,1990, pp. 1326-29

E. R. Moore, M. Crowder and A. A. Ogale, "Effect of Atmospheric Gases on Rheology of Polystyrene," Proc. ANTEC '90, Dallas, May, 1990, pp. 1575-78

A. Banerjee, A. A. Ogale and D. D. Edie, "Interfacial Characterization of Composites by Dynamic Mechanical Analysis," Proc. 34th Int. SAMPE Symp., Reno, May 8-11, 1989

A. Banerjee, D. D. Edie and A. A. Ogale, "Interfacial Characteristics of Carbon/Epoxy Composites," Proceedings of the American Society for Composites, 2nd Technical Conference, September, 1987

Technical Reports

R. Geist, A. A. Ogale, E. McAliley, and K. Waters, "Visualization of Polymer Flows", Silicon Graphics World, 9:9, pp. 13-14, September, 1999.

A. A. Ogale, "Characterization of Microstructure Evolution in Pitch-Based Carbon Fibers During Heat Treatment", Technical Report, AFOSR Summer Faculty Research Program, Contract Number F49620-93-C-0063, August 1998.

Book Chapters

A. A. Ogale, "Creep Behavior of Thermoplastic Composites," Chapter 7 in "Thermoplastic Composite Materials," L. A. Carlsson and R. B. Pipes, Eds., pp. 205-32, Elsevier Scientific Publishing Company, Amsterdam, 1991

Last Updated:April 18, 2009 -- Site Maintained by: Donna Kilbourne
Department of Chemical and Biomolecular Engineering
Clemson University, 127 Earle Hall, Clemson, SC 29634-0909
Phone: (864) 656-3055 -- FAX: (864) 656-0784

Clemson Home -- College Home -- Department Home
calendars -- campus map -- campus tour -- phonebook -- search -- webmail

Copyright © 2002-2006, Clemson University. All rights reserved.
Clemson University, Clemson, South Carolina 29634 -- Area Code: 864, Information: 656-3311