Maier, J.R.A. and Fadel, G.M., 2003, “On the Complexity of the Design-Artifact-User
System,” Proceedings of ICED 03, Stockholm, Sweden. August 19-21, 2003.
Paper no. 1366.
Maier, J.R.A. and Fadel, G.M., 2003, “Affordance-Based Methods for Design,”
ASME DETC-2003, submitted to Design Theory and Methodology Conference,
Chicago, IL.
Ostergaard, K., Wetmore, W., Summers, J., 2003,
“A User Study of the Effects of Communication Method on Design Review Effectiveness”,
ASME DETC-2003, submitted to Design Automation Conference, Chicago,
IL.
Ostergaard, K., Summers, J., 2003, “Modeling
Collaborative Design: Review of Existing Models
and Proposal of a New Information Flow Model”, ASME DETC-2003, submitted
to Design Automation, Chicago, IL.
Ostergaard, K., Summers, J., 2003, “A Taxonomy
for Collaborative Design”, ASME DETC-2003, submitted to Design Automation,
Chicago, IL.
Ostergaard, K., Summers, J., 2003, “An Investigation
of Resistance to Information Flow in Collaborative Design”, International
Conference on Engineering Design, ICED03-1109Sweden, 2003.
Summers, J., Shah, J., 2003, “Developing Measures of Complexity
for Engineering Design”, ASME DETC-2003, submitted to Design Theory
and Methodology, Chicago, IL.
Maier, J.R.A., and Fadel, G.M., 2002, “Comparing Function and Affordance as
Bases for Design,” Proceedings of ASME Design Theory and Methodology
Conference, Montreal, Canada. Paper no. DETC2002/DTM-34029.
Fuchs, D.K., Jokele, B., Kleiner, S., Fadel,
G.M., and Greenstein, J., “Sensitization to the Distributed Development Process”,
paper submitted to the TMCE conference, China, April 2002
Gierhardt, H.; Baumann, C.; Anderl,
R.; Fadel, G. Lindemann, U.; “24hr Design and Development
– A Model of global Design Teams”, Extended abstract submitted to the International
Conference on Engineering Design (ICED), 2001.
McKoy, F., Vargas-Hernandez, N., Summers, J.,
Shah, J., 2001, “Influence of Design
Representation on Effectiveness of Idea Generation”, Proceedings of ASME
Design Theory and Methodology Conference, Pittsburgh, PA. Paper no. DETC2001/DTM-21685.
Shah, J., Vargas-Hernandez, N., Summers, J.,
Kulkarni, S., 2001, “Collaborative Sketching (C-Sketch):
An Idea Generation Technique for Engineering Design”, Journal
of Creative Behavior, Vol., 35, No. 3, pp. 168-98.
Summers, J., Lacroix, Z., Shah, J., 2001, “Collaborative
Mechanical Engineering Design – Representation and Decision Issues”, Le Travail Humain, “Modeling Cooperative Activities in Design”,
No. 8, Presses Universitaires de France, Paris, France.
Maier, J.R.A and Fadel, G.M., 2001, “Affordance: The Fundamental Concept
in Engineering Design,” Proceedings of ASME Design Theory and Methodology
Conference, Pittsburgh, PA. Paper no. DETC2001/DTM-21700.
Maier, J.R.A. and Fadel, G.M., 2001, “Strategic Decisions in the Early Stages
of Product Family Design,” Proceedings of ASME Design for Manufacture
Conference, Pittsburgh, PA. Paper no. DETC2001/DFM-21200.
Simpson, T.W., Maier, J.R.A., and Mistree, F.,
2001. “Product Platform Design: method and
application”. Research in Engineering Design, Vol. 13, No. 1,
pp. 2-22.
Maier, J.R.A, 2000, “Systems Intelligence: Theory and
Application,” Proceedings of International Society for the Systems Sciences
42nd annual meeting, Toronto, Canada.
Lindemann, U., Anderl, R., Gierhardt, H. and
Fadel, G.M., “24 hr Design and Development – An Engine Design Project”. In:
Scrivener, S. A. R.; Ball, L. J.; Woodcock, A.: Collaborative Design, Chapter
B. Springer, New York, 2000
Lindemann, U., Anderl, R., Fadel, G., Greenstein,
J., Gierhardt, H., Fuchs, D-K., Gaul, H.D., Ott, T. “24h- Entwicklung – Ein
Grundlagenproject in der Antriebsentwicklung” Proceedings of the VDI conference,
Hamburg, Germany, 2000
Fadel, G., Lindemann, U., Anderl,
R.; “Multi-National Around the Clock Collaborative Senior Design Project”,
Invited paper, Honorable mention at the ASME Curriculum Innovations
Award 2000.
Simpson, T.W., Maier, J.R.A., and Mistree, F.,
1999. “A Product Platform Concept Exploration
Method for Product Family Design,” Proceedings of ASME Design Theory
and Methodology Conference, Las Vegas, NV. Paper no. DETC99/DTM-8761.
Kirschman, C., Fadel, G. M. ”Classifying Functions
for Mechanical Design”, ASME Journal of Mechanical Design, Vol. 120.3,
pp. 475-482, 9/1998
Adams, N. and Fadel, G. M., ”Constraint Reordering For Multi-Objective
Configuration Design” Proceedings of ASME Design Automation Conference,
Atlanta, GA. Paper no. DETC98/DAC-5597.
Kirschman, C.F. and Fadel, G.M. “Customer Metrics for the Selection of
Generic Forms at the Conceptual Stage of Mechanical Design,” Proceedings
of ASME Design Theory and Methodology Conference, Sacramento, Ca. Paper no.
DETC97/DTM-3877.
Kirschman, C, Fadel, G.M. and Jara-Almonte, C.
“Classifying Functions for Mechanical
Design” Proceedings of ASME Design Theory and Methodology Conference,
Irvine, CA. Paper no. 96-DETC/DTM-1504.
Challa, V., Fadel, G.M., “ Design Data Decomposition”
Paper presented at the ASME Annual Congress, San Francisco, Published in
Conference Proceedings, 1995