Book Chapters

(1) M. Grujicic, Chapter 9 -Particle/Substrate Interaction in the Cold Spray Bonding Mechanism in”Fundamentals of Cold-Gas Dynamic Spray Editors: Victor K Champagne, Woodhead Publishing Limited, London, 2007.

(2) G. B. Olson and M. Grujicic, Chapter 15 - Martensitic Transformation in "Kinetics of Phase Transformations", editors M. L. Aziz, A. L. Greer and F. Spaepan, in preparation, 2001.

(3) W. S. Owen and M. Grujicic, Encyclopedia of Materials Science and Engineering, Section - "Plastic Deformation: Thermally Activated Glide of Dislocations", Pergamon Press, Oxford, England, pp. 3540-3543, 1986.

(4) M. Grujicic, A. M. Sarosiek, L Kaufman and W. S. Owen, Perspectives in Physical Metallurgy, Section - "The Carbonitride/ Austenite Equilibrium in Fe-(C+N)-V-Nb-Mn System", ed. T. Bell, Pergamon Press, Oxford, England, pp. 120-131, 1985.

Return to top

Refereed Journal Publications:

(206) M. Grujicic, T. He, H. Marvi, B. A. Cheeseman, C.-F. Yen, " A Comparative Invesigation of the Use of Laminate-level Meso-scale and Fracture-mechanics Enriched Meso-scale Composite-material Models in Ballistic Resistance Analyses ," Materials and Design, pending approval for manuscript submission, May 2009.

(205) M. Grujicic, G. Arakere, V. Sellappan, A. Vallejo, M. Ozen, " Structural-response Analysis, Fatigue-life Prediction and Material Selection for 1MW Horizontal-axis Wind-turbine Blades ," Materials Engineering and Performance, submitted for publication, August 2009.

(204) D. W. Wagner, A. Vallejo, M. Grujicic, G. Arakere, X. Xie, " Design optimization and Material Selection for a Femoral-fracture Fixation-plate Implant ," Materials and Design, submitted for publication, August 2009.

(203) M. Grujicic, G. Arakere, H. V. Yalavarthy, T. He, C-F.Yen, B. A. Cheeseman, " Modeling of AA5083 Material-microstructure Evolution During Butt Friction-stir Welding ," Materials Engineering and Performance, accepted for publication, July 2009.

(202) M. Grujicic, T. He, G. Arakere, H. V. Yalavarthy, C-F.Yen, B. A. Cheeseman, " Fully-coupled Thermo-mechanical Finite-element Investigation of Material Evolution During Friction-Stir Welding of AA5083 ," Materials Engineering and Performance, submitted for publication, July 2009.

(201) S. Polavarapu, L. L. Thompson, M. Grujicic, " Topology and Free Size Optimization with Manufacturing Constraints for Light Weight Die Cast Automotive Backrest Frame ," ASME Paper IMECE2009-10823 - ASME International Mechanical Engineering Congress and Exposition IMECE2009, Nov 13-19, 2009, Lake Buena Vista, Florida, USA.

(200) M. Grujicic, W. C. Bell, B. Pandurangan, B. A. Cheeseman, C. Fountzoulas, P. Patel, D. W. Templeton, K. D. Bishnoi, " The Effect of High-pressure Densification on Ballistic-penetration Resistance of Soda lime Glass ," Journal of Battlefield Technology, pending approval for manuscript submission, May 2009.

(199) M. Grujicic, H. Marvi, H. V. Yalavarthy, B. A. Cheeseman, " Concurrent Application of Computational and Dimensional Analyses in the Design/Sizing of Vehicle Floor-Plates for Landmine-Blast Survivability ," Journal of Materials Engineering and Performance, pending approval for manuscript submission, May 2009.

(198) M. Grujicic, B. Pandurangan, G. Arakere, W. C. Bell, T. He, X. Xie, " Material-modeling and Structural-mechanics Aspects of the Traumatic Brain Injury Problem ," Materials and Design, submitted for publication, May 2009.

(197) B. A. Cheeseman, M. Grujicic, B. Pandurangan, T. He, G. Arakere, W. C. Bell, P. S. Glomski, " Material Modeling and Dynamic-Response Analysis of Resin-starved Cross-collimated Compliant Composites ," The 1st Joint Canadian & American Technical Conference, Chou Symposium, accepted for publication, August 2009.

(196) M. Grujicic, G. Arakere, W. C. Bell, H. Marvi, H. V. Yalavarthy, B. Pandurangan, I. Haque, G. M. Fadel, " Reliability-based Design Optimization for Durability of Ground-vehicle Suspension-system Components ," Journal of Materials Engineering and Performance, accepted for publication, April 2009.

(195) M. Grujicic, B. Pandurangan, X. Xie, A. K. Gramopadhye, " Musculoskeletal Computational Analysis of the Influence of Car-Seat Design/Adjustments on Long-distance Driving Fatigue ," International Journal of Industrial Ergonomics, submitted for publication, April 2009.

(194) M. Grujicic, B. Pandurangan, G. Arakere, W. C. Bell, T. He, X. Xie, " Seat-cushion and Soft-tissue Material Modeling and a Finite Element Investigation of the Seating Comfort for Passenger-vehicle Occupants ," Materials and Design, 30, pp. 4273-4285, 2009.

(193) M. Grujicic, W. C. Bell, G. Arakere, T. He, X. Xie, B. A. Cheeseman, " Development of a Meso-scale Material Model for Ballistic Fabric and its Use in Flexible-armor Protection Systems ," Journal of Materials Engineering and Performance, accepted for publication, February 2009.

(192) M. Grujicic, G. Arakere, W. C. Bell, I. Haque, " Computational Investigation of the Effect of Up-armoring on Occupant Injury/Fatality Reduction of a Prototypical High-mobility Multi-purpose Wheeled Vehicle Subjected to Mine-blast ," Journal of Automobile Engineering, 223, pp. 903-920, 2009.

(191) M. Grujicic, H. Marvi, G. Arakere, W. C. Bell, I. Haque " The Effect of Up-armoring the High-Mobility Multi-purpose Wheeled Vehicle (HMMWV) on the Off-road Vehicle Performance ," Multidiscipline Modeling in Materials and Structures, submitted for publication, February 2009.

(190) M. Grujicic, P. S. Glomski, T. He, G. Arakere, W. C. Bell, B. A. Cheeseman, " Material Modeling and Ballistic-resistance Analysis of Armor-grade Composites Reinforced with High-performance Fibers ," Journal of Materials Engineering and Performance, accepted for publication, February 2009.

(189) M. Grujicic, H. Marvi, G. Arakere, I. Haque, " A Finite Element Analysis of Pneumatic-Tire/Sand Interactions During Off-Road Vehicle Travel ," Multidiscipline Modeling in Materials and Structures, accepted for publication, February 2009.

(188) M. Grujicic, W. C. Bell, B. Pandurangan, B. A. Cheeseman, C. Fountzoulas, P. Patel, D. W. Templeton, K. D. Bishnoi, " Design and Material Selection Guidelines and Strategies for Transparent Armor Systems ," Journal of Battlefield Technology, pending approval for manuscript submission, December 2008.

(187) M. Grujicic, V. Sellappan, G. Arakere, J. M. Ochterbeck, Norbert Seyr, Andreas Obieglo, Marc Erdmann, Jochen Holzleitner, " Investigation of a Polymer Metal Inter-locking Technology for use in Load-bearing Automotive Components," Multidiscipline Modeling in Materials and Structures, accepted for publication, November 2008.

(186) M. Grujicic, W. C. Bell, G. Arakere, I. Haque, " Finite Element Analysis of the Effect of Up-armoring on the Off-road Braking and Sharp-turn Performance of a High-Mobility Multi-purpose Wheeled Vehicle (HMMWV) ," Journal of Automobile Engineering, accepted for publication, June 2009.

(185) M. Grujicic, G. Arakere, H. K. Nallagatla, W. C. Bell, I. Haque, " Computational Investigation of Blast Survivability and Off-road Performance of an Up-armored High-Mobility Multi-purpose Wheeled Vehicle (HMMWV) ," Journal of Automobile Engineering, 223, pp. 301-325, 2009.

(184) M. Grujicic, G. Arakere, T. He, W. C. Bell, P. S. Glomski, B. A. Cheeseman, " Multi-scale Ballistic Material Modeling of Cross-plied Compliant Composites ," Composites Part B: Engineering, 40, pp. 468-482, 2009.

(183) M. Grujicic, T. He, B. Pandurangan, W. C. Bell, N. Coutris, B. A. Cheeseman, W. N. Roy and R. R. Skaggs, " Development, Parameterization and Validation of a Visco-Plastic Material Model for Sand With Different Levels of Water Saturation ," Journal of Materials: Design and Applications, 223, pp. 63-81, 2009.

(182) M. Grujicic, B. Pandurangan, N. Coutris, B. A. Cheeseman, W. N. Roy and R. R. Skaggs, " Derivation, Parameterization and Validation of a Sandy-Clay Material Model For Use in Landmine Detonation Computational Analyses ," Journal of Materials Engineering and Performance, accepted for publication, June 2009.

(181) M. Grujicic and F. J. Schoen, " A Tribute to Professor Walter Shepherd Owen - One of the Pioneers in the Field of Martensitic Transformation ," ICOMAT-2008, Santa Fe, NM, accepted for publication, November 2008.

(180) M. Grujicic, W. C. Bell, T. He, G. Arakere, B. A. Cheeseman, K. L. Koudela and J. F. Tarter, " A Computational Investigation of the Ballistic Performance of a Prototypical Multi-Ply Plain-Woven Fabric Armor ," The Proceedings of the 2008 Fall SAMPE Technical Conference, Memphis, Tennessee, September 8-11, 2008.

(179) M. Grujicic, G. Arakere, T. He, W. C. Bell, B. A. Cheeseman, C-F.Yen and B. Scott, " A Ballistic Material Model for Cross-Plied Unidirectional Ultra-High Molecular Weight Polyethylene Fiber-Reinforced Armor-Grade Composites ," Materials Science and Engineering A, 498, pp. 231-241, 2008.

(178) M. Grujicic, B. Pandurangan, N. Coutris, B. A. Cheeseman, C. Fountzoulas and P. Patel, " A Computational Investigation of the Multi-Hit Ballistic-Protection Performance of Laminated Glass-Polycarbonate Transparent Armor Systems ," Materials and Design, pending approval for manuscript submission, May 2008.

(177) M. Grujicic, B. Pandurangan, W. C. Bell, N. Coutris, B. A. Cheeseman, C. Fountzoulas and P. Patel, " An Improved Mechanical Material Model for Ballistic Soda-Lime Glass ," Journal of Materials Engineering and Performance,, accepted for publication, December 2008.

(176) M. Grujicic, W. C. Bell, T. He and B. A. Cheeseman, " Development and Verification of a Meso-scale based Dynamic Material Model for Plain-woven Single-ply Ballistic Fabric ," Journal of Material Science, 43, pp. 6301-6323, 2008.

(175) M. Grujicic, B. Pandurangan, N. Coutris, B. A. Cheeseman, C. Fountzoulas and P. Patel, " A Simple Ballistic Material Model for Soda-Lime Glass ," International Journal of Impact Engineering, 36, pp. 386-401, 2009.

(174) M. Grujicic, W. C. Bell, G. Arakere, T. He and B. A. Cheeseman, " A Meso-Scale Unit-Cell Based Material Model for the Single-ply Flexible-Fabric Armor ," Materials and Design, 30, pp. 3690-3704, 2009.

(173) M. Grujicic, G. Arakere, T. He, M. Gogulapati and B. A. Cheeseman, " A Numerical Investigation of the Influence of Yarn-Level Finite-Element Model on Energy Absorption by a Flexible-Fabric Armor During Ballistic Impact ," Journal of Materials: Design and Applications, 222, pp. 259-276, 2008.

(172) M. Grujicic, W. C. Bell, H. Marvi, I. Haque, B. A. Cheeseman, W. N. Roy and R. R. Skaggs, " A Computational Analysis of Survivability of a Pick-Up Truck Subjected to Mine Detonation Loads ," Multidiscipline Modeling in Materials and Structures, accepted for publication, June 2008.

(171) W. Wang, Y.Huang, and M. Grujicic, " A Study of Impact-Induced Mechanical Effects in Cell Direct Writing Using Smooth Particle Hydrodynamic Method ," ASME J. of Manufacturing Sci. and Eng., 130, pp. 1-10, 2008.

(170) M. Grujicic, B. Pandurangan, N. Coutris, B. A. Cheeseman, C. Fountzoulas and P. Patel, " A Ballistic Material Model for STARPHIRE, A Soda-Lime Transparent-Armor ," Materials Science and Engineering A, 491, pp. 397–411, 2008.

(169) M. Grujicic, V. Sellappan, S. Kotrika, G. Arakere, A. Obieglo, M. Erdmann, and J. Holzleitner, " Suitability Analysis of a Polymer Metal Hybrid Technology Based on High-Strength Steels and Direct Polymer-to-Metal Adhesion for Use in Load-Bearing Automotive Body-In-White Applications ," Journal of Materials Processing Technology, 209, pp. 1877-1890, 2009.

(168) M. Grujicic, V. Sellappan, T. He, N. Seyr, A. Obieglo, M. Erdmann and J. Holzleitner, " Total Life-Cycle Based Materials Selection for Polymer Metal Hybrid Body-In-White Automotive Components ," Journal of Materials Engineering and Performance, 18, pp. 111-128, 2009.

(167) M. Grujicic, V. Sellappan, G. Arakere, N. Seyr, A. Obieglo, M. Erdmann and J. Holzleitner, " The Potential of a Clinch-Lock Polymer Metal Hybrid Technology for Use in Load-Bearing Automotive Components ," Journal of Materials Engineering and Performance, 18, pp. 893-902, 2009.

(166) M. Grujicic, B. Pandurangan, N. Coutris, B. A. Cheeseman, W. N. Roy and R. R. Skaggs, " Computer-simulations based Development of a High Strain-rate, Large-deformation, High-pressure Material Model for STANAG 4569 Sandy Gravel ," Soil Dynamics and Earthquake Engineering, 28, pp. 1045–1062, 2008.

(165) M. Grujicic, V. Sellappan, G. Arakere, J. C. Ziegert, F. Y. Koçer and D. Schmueser, " Multi-Disciplinary Design Optimization of a Composite Car Door for Structural Performance, NVH, Crashworthiness, Durability and Manufacturability ," Multidiscipline Modeling in Materials and Structures, 5, pp. 1-28, 2009.

(164) M. Grujicic, V. Sellappan, B. Pandurangan, G. Li, N. Seyr, A. M. Erdmann and J. Holzleitner, " Computational Analysis of Injection-Molding Residual-Stress Development in Direct-Adhesion Polymer-to-Metal Hybrid Body-In-White Components ," Materials Processing Technology, 203, pp. 19-36, 2008.

(163) M. Grujicic, B. Pandurangan, W. C. Bell, M. Daqaq, L. Ma,N. Seyr, M. Erdmann and J. Holzleitner, " A Computational Analysis and Suitability Assessment of Cold-Gas Spraying of Glass-Fiber Reinforced Poly-Amide 6 for Use in Direct-Adhesion Polymer Metal Hybrid Automotive Components ," Applied Surface Science, 254, pp. 2136-2145, 2008.

(162) S. Teegavarapu, M. Snider, J. Summers, L. Thompson, and M. Grujicic, " A Driver for Selection of Functionally Inequivalent Concepts at Varying Levels of Abstraction ," Journal of Design Research, 6, no. 1&2, pp. 218-38, 2007.

(161) M. Grujicic, V. Sellappan, L. Mears, X. Xuan, N. Seyr, M. Erdmann and J. Holzleitner, " Selection of the Spraying Technologies for Over-Coating of Metal-Stampings with Thermo-Plastics for Use In Direct-Adhesion Polymer Metal Hybrid Load-Bearing Component ," Materials Processing Technology, 198, pp. 300-312, 2008.

(160) M. Grujicic, " Chapter 9 -Particle/Substrate Interaction in the Cold Spray Bonding Mechanism ," Fundamentals of Cold-Gas Dynamic Spray, Editors: V. K Champagne and D. J. Helfritch, Woodhead Publishing Limited, London, 2007.

(159) M. Grujicic, B. Pandurangan, B. A. Cheeseman, W. N. Roy and R. R. Skaggs, " A Vehicle-Level Computational Analysis of the Effect of Degree of Sand Saturation on the Destruction Caused by Detonation of a Buried Mine ," Journal of Battlefield Technology, pending approval for manuscript submission, January 2007.

(158) M. Grujicic, W. C. Bell, K. L. Koudela, J. F. Tarter and N. Duke, " Smart-Fuze Design and Development Based on Computational Analysis of Warhead/Urban-Target Interactions ," Journal of Battlefield Technology, pending approval for manuscript submission, April 2007.

(157) M. Grujicic, G. Arakere, P. Pisu, B. Ayalew, N. Seyr and M. Erdmann, " Application of Topology, Size and Shape Optimization Methods in Polymer Metal Hybrid Structural Lightweight Engineering ," Multidiscipline Modeling in Materials and Structures, 4, pp. 305-330, 2008.

(156) M. Grujicic, V. Sellappan, M. A. Omar, N. Seyr and M. Erdmann, " An Overview of the Polymer-to-Metal Direct-Adhesion Hybrid Technologies for Load-Bearing Automotive Components ," Materials Processing Technology, 197, pp. 363-373, 2008.

(155) M. Grujicic, B. Pandurangan, N. Coutris, B. A. Cheeseman, W. N. Roy and R. R. Skaggs, " Derivation and Validation of a Material Model for Clayey Sand for Use in Landmine Detonation Computational Analysis ," Multidiscipline Modeling in Materials and Structures, accepted for publication, May 2007.

(154) M. Grujicic, V. Sellappan, G. Arakere, N. Seyr and M. Erdmann, " Computational Feasibility Analysis of Direct-Adhesion Polymer-to-Metal Hybrid Technology for Load-Bearing Body-In-White Structural Components ," Journal of Materials Processing Technology, 195, pp. 282-298, 2008.

(153) M. Grujicic, B. Pandurangan, R. Qiao, B. A. Cheeseman,R. R. Skaggs and R. Gupta, " Parameterization of the Porous-Material Model for Sand with Different Levels of Water Saturation ," Soil Dynamics and Earthquake Engineering, 28, pp. 20-35, 2008.

(152) M. Grujicic, B. Pandurangan, G. M. Mocko, S. T. Hung, B. A. Cheeseman, W. N. Roy and R. R. Skaggs, " A Combined Multi-Material Euler/Lagrange Computational Analysis of Blast Loading Resulting from Detonation of Buried Landmines ," Multidiscipline Modeling in Materials and Structures, 4, pp. 105-124, 2008.

(151) M. Grujicic, B. Pandurangan, I. Haque, B. A. Cheeseman and R. R. Skaggs, " A Computational Analysis of Mine Blast Survivability of a Commercial Vehicle Structure ," Multidiscipline Modeling in Materials and Structures, 3, pp. 431-460, 2007.

(150) M. Grujicic, W. C. Bell, S. B. Biggers, K. L. Koudela and B. A. Cheeseman, " Enhancement of the Ballistic-Protection Performance of E-glass Reinforced Poly-Vinyl-Ester-Epoxy Composite Armor Via the Use of a Carbon-Nanotube Forest-Mat Strike Face ," Materials: Design and Applications, 222, pp. 15-28, 2008.

(149) M. Grujicic, W. C. Bell, L. L. Thompson, K. L. Koudela and B. A. Cheeseman, " Ballistic-Protection Performance of Carbon-Nanotube Doped Poly-Vinyl-Ester-Epoxy Composite Armor Reinforced with E-glass Fiber Mats ," Material Science and Engineering A, 479, pp. 10-22, 2008.

(148) M. Grujicic, B. Pandurangan, J. D. Summers, B. A. Cheeseman and W. N. Roy, " Application of the Modified Compaction Material Model to Soil With Various Degrees of Water Saturation ," Shock and Vibration, 15, pp. 79-99, 2008.

(147) M. Grujicic, B. Pandurangan, D. C. Angstadt, K. L. Koudela and B. A. Cheeseman, " Ballistic-Performance Optimization of a Hybrid Carbon-Nanotube /E-glass Reinforced Poly-Vinyl-Ester-Epoxy-Matrix Composite Armor," Journal of Materials Science, 42, pp. 5347-5359, 2007.

(146) R. Singh, P. Chandran, M. Grujicic, K. F. Poole, U. Vingnani, S. R. Ganapathi, A. Swaminathan, P. Jagannathan, and H. Iyer, " A Dominance of Silicon CMOS-based Semiconductor Manufacturing Beyond International Technology Roadmap and for Many More Decades to Come," International Journal of ..., submitted for publication, May 2006.

(145) M. Grujicic, D. C. Angstadt, Y.-P. Sun and K. L. Koudela, " Micro-mechanics Based Derivation of the Materials Constitutive Relations for Carbon Nanotube Reinforced Poly-Vinyl-Ester-Epoxy Based Composites," Journal of Materials Science, 42, pp. 4609-4623, 2007.

(144) M. Grujicic, B. Pandurangan, Y. Huang, B. A. Cheeseman, W. N. Roy and R. R. Skaggs, " Impulse Loading Resulting from Shallow Buried Explosives in Water-saturated Sand," Journal of Materials: Design and Applications, 221, pp. 21-35, 2007.

(143) M. Grujicic, B. Pandurangan, U. Zecevic, K. L. Koudela and B. A. Cheeseman, " Ballistic Performance of Alumina/S-2 Glass Fiber-Reinfoced Polymer-Matrix Composite Hybrid Light Weight Armor Against Armor Piercing (AP) and Non-AP Projectiles," Multidiscipline Modeling in Mateials and Structures, 3, pp. 287-312, 2007.

(142) M. Grujicic, Y. P. Sun and K. L. Koudela, " The Effect of Covalent Functionlization of Carbon Nanotube Reinforcements on the Atomic-level Mechanical Properties of Poly-Vinyl-Ester-Epoxy," Applied Surface Science, 253, pp. 3009-3021, 2007.

(141) M. Grujicic, B. Pandurangan, K. L. Koudela and B. A. Cheeseman," A Computational Analysis of the Ballistic Performance of Light-Weight Hybrid-Composite Armor," Applied Surface Science, 253, pp. 730-745, 2006.

(140) M. Grujicic, B. Pandurangan and B. A. Cheeseman, " The Effect of Degree of Saturation of Sand on Detonation Phenomena Associated with Shallow-buried and Ground-laid mines," Shock and Vibration, 13, pp. 41-62, 2006.

(139) M. Grujicic, B. Pandurangan and B. A. Cheeseman," A Computational Analysis of Detonation of Buried Mines," Multidiscipline Modeling in Materials and Structures, 2, pp. 363-387, 2006.

(138) M. Grujicic, B. Pandurangan, C. L. Zhao and B. A. Cheeseman, " A Computational Investigation of Various Water-Induced Explosion Mitigation Mechanisms," Multidiscipline Modeling in Materials and Structures, 3, pp. 185-212, 2007.

(137) M. Grujicic, B. Pandurangan, C. L. Zhao, S. B. Biggers, and D. R. Morgan," Hypervelocity Impact Resistance of Reinforced Carbon-Carbon/Carbon-Foam Thermal Protection Systems," Applied Surface Science, 252, pp. 5035-5050, 2006.

(136) M. Grujicic, C. L. Zhao, S. B. Biggers, J. M. Kennedy and D. R. Morgan, " Suitability of a Coal-Derived Carbon-Based Foam for Use in Thermal Protection Systems of Common Aero Vehicles," Multidiscipline Modeling in Materials and Structures, 3, pp. 1-26, 2007.

(135) M. Grujicic, C. L. Zhao, S. B. Biggers, and D. R. Morgan, " Experimental Investigation and Modeling of Effective Thermal Conductivity and its Temperature Dependence in a Carbon-based Foam," Journal of Materials Science, 41, pp. 2309-2317, 2006.

(134) M. Grujicic, G. Cao and W. N. Roy, " Suitability of Boron-nitride Single-walled Nanotubes as Fluid-flow Conduits in Nano-valve Applications," Applied Surface Science, 246, pp. 149-158, 2005.

(133) M. Grujicic, G. Cao and W. N. Roy, " A Computational Analysis of the the Lattice Contribution to Thermal Conductivity of Single-walled Carbon Nanotubes," Journal of Materials Science, 40, pp. 1943-1952, 2005.

(132) M. Grujicic, C. L. Zhao and E. C. Dusel, "The Effect of Thermal Contact Resistance on Heat Management in the Electronic Packaging," Applied Surface Science, 246, pp. 290-302, 2005.

(131) M. Grujicic, C. L. Zhao, E. C. Dusel. R. S. Miller, D. E. Beasley and D. R. Morgan, "A Computational Analysis of the Thermal Conductivity of the Carbon-Carbon Composite Materials," Journal of Materials Science, 41, pp. 8244-8256, 2006.

(130) M. Grujicic, C. L. Zhao, S. B. Biggers, J. M. Kennedy and D. R. Morgan, "Heat Transfer and Effective Thermal Conductivity Analyses In Carbon-based Foams For Use In Thermal Protection Systems," Journal of Materials: Design and Applications, 219, pp. 217-230, 2005.

(129) M. Grujicic, G. Cao, B. Pandurangan and W. N. Roy, "Finite Element Analysis Based Design of a Fluid-flow Control Nano-valve," Materials Science & Engineering B, 117, pp. 53-61, 2005.

(128) M. Grujicic, C. L. Zhao, and E. M. Austin, " Optimization of a Piezoelectric Bimorph Grasper for Use in Minimally Invasive Surgical Applications," Journal of Materials: Design & Applications, 219, pp. 673-683, 2005.

(127) M. Grujicic, K. M. Chittajallu, G. Cao and W. N. Roy, "An Atomic Level Analysis of Conductivity and Strength in Poly(Ethylene Oxide) Sulfonic Acid Based Solid Polymer Electrolytes," Materials Science and Engineering B, 117, pp. 187-197, 2005.

(126) M. Grujicic, C. L. Zhao and W. N. Roy, "A Statistical Analysis of the Mechanical and Electronic-transport Properties of Stochastic Porous Fibrous Materials," Journal of Materials Science, 40, pp. 5181-5190, 2005.

(125) M. Grujicic, G. Cao and W. N. Roy, "A Computational Analysis of the Carbon-Nanotube-based Resonant-circuit Sensors," Applied Surface Science, 229, pp. 316-323, 2004.

(124) L. Qi, B. I. Lee, X. Gu, M. Grujicic, W. D. Samuels, and G. J. Exarhos, "Concentration Efficiency of Doping in Phosphors: Investigation of the copper- and aluminum-doped zinc sulfide," Appl. Phys Lettr., 83, pp. 4945-4947, 2003.

(123) M. Grujicic, G. Cao and W. N. Roy, "A Computational Analysis of the Percolation Threshold and the Electrical Conductivity of Carbon Nanotubes Reinforced Polymeric Materials," Journal of Materials Science, 39, pp. 4441-4449, 2004.

(122) M. Grujicic, K. M. Chittajallu and S. Walsh, "Lattice Boltzmann Method Based Computation of the Permeability of the Orthogonal Plain-weave Fabric Preforms," Applied Surface Science, 41, pp. 7989-8000, 2006.

(121) M. Grujicic, G. Cao and W. N. Roy, "Atomistic Modeling of Solubilization of Carbon Nanotubes by Non-covalent Functionalization with Poly(p-Phenylenevinylene-Co-2, 5-Dioctoxy-m-Phenylenevinylene)," Applied Surface Science, 227, pp. 349-363, 2004.

(120) M. Grujicic, K. M. Chittajallu and S. Walsh, "Effect of Shear, Compaction and Nesting on Permeability of the Orthogonal Plain-weave Fabric Performs," Materials Chemistry and Physics, 86, pp. 358-369, 2004.

(119) M. Grujicic, C. L. Zhao, W. S. DeRosset and D. Helfritch, "Adiabatic Shear Instability based Mechanism for Particle/Substrate Bonding in the Cold-gas Dynamic-spray Process," Materials and Design, 25, pp. 681-688, March 2004.

(118) M. Grujicic, G. Cao and W. N. Roy, "Atomistic Simulations of the Solubilization of Single-walled Carbon Nanotubes in Toluene," Journal of Materials Science, 39, pp. 2315-2325, 2004.

(117) M. Grujicic, C. L. Zhao, C. Tong, W. S. DeRosset and D. Helfritch, "Analysis of the Impact Velocity of Powder Particles in the Cold-gas Dynamic-spray Process," Materials Science and Engineering A, 368, pp. 222-230, 2004.

(116) M. Grujicic, K. M. Chittajallu and J. T. Pukrushpan, "Control of the Transient Behavior of Polymer Electrolyte Membrane (PEM) Fuel Cell Systems," Journal of Automobile Engineering, 218, pp. 1239-1250, 2004.

(115) M. Grujicic, K. M. Chittajallu, E. H. Law and J. T. Pukrushpan, "Model Based Control Strategies in the Dynamic Interaction of Air Supply and Fuel Cell," Journal of Power and Energy, 218A, pp. 487-450, March 2004.

(114) M. Grujicic, C. L. Zhao, K. M. Chittajallu and J. M. Ochterbeck, "Cathode and Interdigitated Air Distributor Optimization in Polymer Electrolyte Membrane (PEM) Fuel Cells," Materials Science and Engineering B, 108, pp. 241-252, 2004.

(113) M. Grujicic and K. M. Chittajallu, "Geometrical Optimization of The Cathode in Polymer Electrolyte Membrane (PEM) Fuel Cells," Chemical Engineering Science, 59, pp. 5883-5895, 2004.

(112) M. Grujicic and K. M. Chittajallu, "Design and Optimization of Polymer Electrolyte Membrane (PEM) Fuel Cells," Applied Surface Science, 227, pp. 56-72, 2004.

(111) M. Grujicic, J. R. Saylor, D. E. Beasley, W. S. DeRosset and D. Helfritch, "Computational Analysis of the Interfacial Bonding Between Feed Powder Particles and the Substrate in the Cold-gas Dynamic-spray Process," Applied Surface Science, 219, pp. 211-327, 2003.

(110) M. Grujicic, K. M. Chittajallu and S. Walsh, "Non-isothermal Preform Infiltration During the Vacuum Assisted Resin Transfer (VARTM) Process," Applied Surface Science, 245, pp. 51-64, 2005.

(109) M. Grujicic W. S. DeRosset and D. Helfritch, "Flow Analysis and Nozzle-shape Optimization for the Cold-gas Dynamic-spray Process," Journal of Engineering Manufacture, 217, pp. 1603-1613, 2003.

(108) M. Grujicic, K. M. Chittajallu and S. Walsh, "Optimization of the VARTM Process for Enhancement of the Degree of Devolatilization of Polymerization By-products and Solvents," Journal of Materials Science, 38, pp. 1729-1739, 2003.

(107) M. Grujicic, G. Cao and R. Singh, "The Effect of Topological Defects and Oxygen Adsorbates on the Electronic Transport Properties of Single-Walled Carbon Nanotubes," Applied Surface Science, 211, pp. 166-183, 2003.

(106) M. Grujicic, G. Cao, A. M. Rao, T. M. Tritt and S. Nayak, "UV-Light Enhanced Oxidation of Carbon Nanotubes Through Adsorption of Polar Molecules," Applied Surface Science, 214, pp. 289-303, 2003.

(105) M. Grujicic, G. Cao and B. Gersten, "Enhancement of Field Emission in Carbon Nanotubes Through Adsorption of Polar Molecules," Applied Surface Science, 206, pp. 167-177, 2003.

(104) M. Grujicic, G. Cao and P. F. Joseph, "Multi-Scale Modeling of Deformation and Fracture of Polycrystalline Lamellar g-TiAl + a2-Ti3Al Alloys," Int. J. Multiscale Computational Engineering, 1, pp. 1-21, 2003.

(103) M. Grujicic, G. Cao and B. Gersten, "Atomic-Scale Computations of the Lattice Contribution to Thermal Conductivity of Single-Walled Carbon Nanotubes," Materials Science and Engineering B, 107, pp. 204–216, 2004.

(102) J. Huang, G. M. Fadel, V. Y. Blouin and M. Grujicic, "Bi-objective Optimization Design of Functionally Gradient Materials," Materials & Design, 23, pp. 657-666, 2002.

(101) M. Grujicic, G. Cao and R. S. Miller, "Computer Modeling of the Evolution of Dendrite Microstructure in Binary Alloys During Non-isothermal Solidification," Journal of Materials Synthesis and Processing, 10, pp. 191-203, 2002.

(100) M. Grujicic, J. R. Delong and W. DeRosset, "The Effect of Lining Segmentation on the Reliability of Hybrid Ceramic/Steel Gun Barrels," Materials & Design, 24, pp. 69-78, 2003.

(99) M. Grujicic, J. R. Delong and W. DeRosset, "A Reliability Analysis of Hybrid Ceramic/Steel Gun Barrels," International Journal of Fatigue and Fracture in Engineering Materials and Structures, 26, 405-420, 2002.

(98) M. Grujicic, G. Cao and B. Gersten, "An Atomic-Scale Analysis of Catalytically-Assisted Chemical Vapor Deposition of Carbon Nanotubes," Materials Science and Engineering B, B94, pp. 247-259, 2002.

(97) M. Grujicic, G. Cao and B. Gersten, "Optimization of the Chemical Vapor Deposition Process for Carbon Nanotubes Fabrication ,” Applied Surface Science, 191, pp. 223-239, 2002.

(96) M. Grujicic, J. R. Delong and W. DeRosset, " Probabilistic Finite Element Analysis of Residual Stresses in Shrink-Fit Hybrid Ceramic/Steel Gun Barrels," Journal of Materials: Design & Applications, 216 Part L, pp. 219-232, 2002.

(95) M. Grujicic, G. Cao and B. Gersten, "Reactor Length-Scale Modeling of Chemical Vapor Deposition of Carbon Nanotubes ,” Journal of Materials Science, 38, pp. 1819-1830, 2003.

(94) M. Grujicic, G. Cao and S. Batchu, "Crystal Plasticity-Based Finite Element Analysis of Deformation and Fracture of Polycrystalline Lamellar g-TiAl + a2-Ti3Al Alloys," Journal of Materials Science, 33, pp. 307-322, 2003.

(93) M. Grujicic and G. Cao, "Crack Growth in Lamellar Titanium Aluminides Containing Dispersed Beta Phase Precipitates," Journal of Materials Science, 37, pp. 2949-2963, 2002.

(92) R. S. Miller, G. Cao and M. Grujicic, "Monte Carlo Simulation of Three-Dimensional Non-Isothermal Grain-Microstructure Evolution: Application to LENS™ Rapid Fabrication," Journal of Materials Synthesis and Processing, 9, 329-345, 2002.

(91) M. Grujicic, Y. Hu, G. M. Fadel and D. M. Keicher, "Optimization of the LENS™ Rapid Fabrication Process for In-Flight Melting of the Feed Powder ," Journal of Materials Synthesis and Processing, 9, pp. 223-233, 2002.

(90) M. Grujicic, G. Cao and G. M. Fadel, "Effective Materials Properties: Determination and Application in Mechanical Design and Optimization," Journal of Materials: Design & Applications, 215, pp. 225-234, 2002.

(89) M. Grujicic and S. Batchu, "Crystal Plasticity Analysis of Earing in Deep-Drawn OFHC Copper Cups," Journal of Material Science, 37, pp. 753-764, 2002.

(88) D. Columbus and M. Grujicic, "A Comparative Discrete- Dislocation/Nonlocal Crystal-Plasticity Analysis of Plane-Strain Mode I Fracture," Materials Science and Engineering, A323, pp. 386-402, 2002.

(87) M. Grujicic, G. Cao and R. S. Figliola, "Computer Simulations of the Evolution of Solidification Microstructure in the LENS™ Rapid Fabrication Process," Applied Surface Science, 183, pp. 43-57, 2001.

(86) D. Columbus and M. Grujicic, "A Comparison of Mode I Fracture Behavior of F.C.C. and B.C.C. Metallic Materials: A Discrete Dislocation Analysis," Applied Surface Science, 180, pp. 138-161, 2001.

(85) M. Grujicic and S. Batchu, "A Crystal Plasticity Materials Constitutive Model for Polysynthetically-twinned g-TiAl + a2-TiAl Single Crystals," Journal of Materials Science, 36, pp. 2851-2863, 2001.

(84) M. Grujicic and D. Columbus, "A Comparative Discrete- Dislocation/Crystal-Plasticity Analysis of Bending of a Single-Crystalline Microbeam," Journal of Material Science, 36, pp. 2179-2188, 2001.

(83) M. Grujicic and S.G. Lai, "Multi Length-scale Modeling of CVD of Titanium Nitride Coatings," Journal of Material Science, 36, pp. 2937-2953, 2001.

(82) M. Grujicic and S.G. Lai, "Grain-scale Modeling of CVD of Polycrystalline Diamond Films," Journal of Materials Synthesis and Processing, 8, pp. 73-85, 2000.

(81) M. Grujicic and S.G. Lai, "Multi Length-scale Modeling of CVD of Diamond: Part I: A Combined Reactor Scale/Atomic-scale Analysis," Journal of Material Science, 35, pp. 5359-5369, 2000.

(80) M. Grujicic and S.G. Lai, "Multi Length-scale Modeling of CVD of Diamond: Part II: A Combined Atomic Scale/Grain-scale Analysis," Journal of Materials Science, 35, pp. 5371-5381, 2000.

(79) M. Grujicic and Y. Zhang, "Crystal Plasticity Analysis of Stress-assisted Martensitic Transformation in Ti-10V-2Fe-3Al (wt. %)," Journal of Materials Science, 35, pp. 4635-4647, 2000.

(78) W. S. Owen and M. Grujicic, "Strain Aging of Austenitic Hadfield Manganese Steel," Acta Materialia, 47, pp. 111-126, 1999.

(77) M. Grujicic and Y. Zhang, "Combined Atomistic/Crystal Plasticity Analysis of the Effect of Beta Phase on Deformation and Fracture of Lamellar Gamma Titanium Aluminide," Journal of Materials Science, 34, pp. 1419-1437, 1999.

(76) M. Grujicic and Y. Zhang, "Crystal Plasticity Analysis of the Effect of Dispersed Beta Phase on Deformation and Fracture of Lamellar Gamma Titanium Aluminide," Materials Science and Engineering, A265, pp. 285-300, 1999.

(75) M. Grujicic and S.G. Lai, "Atomistic Simulation of Chemical Vapor Deposition of (111)-Oriented Diamond Film Using a Kinetic Monte Carlo Method," Journal of Materials Science, 34, pp. 7-20, 1999.

(74) M. Grujicic and S.G. Lai, "Effect of Martensitic Transformation in Ti-15 at %V Beta Phase Particles on Lamellar Boundary Decohesion in Gamma TiAl - Part II: Finite Element Analysis of Crack Bridging Phenomenon," Journal of Materials Science, 33, pp. 4401-4415, 1998.

(73) M. Grujicic and S.G. Lai, "Effect of Martensitic Transformation in Ti-15 at %V Beta Phase Particles on Lamellar Boundary Decohesion in Gamma TiAl - Part I: Derivation of Interface Decohesion Potentials," Journal of Materials Science, 33, pp. 4389-4400, 1998.

(72) M. Grujicic and Y. Zhang, "Determination of Effective Elastic Properties of Functionally Graded Materials Using Voronoi Cell Finite Element Method," Materials Science and Engineering, A251, pp. 64-76, 1998.

(71) M. Grujicic and H. Zhao, "Optimization of 316 Stainless Steel/Alumina Functionally Graded Material for Reduction of Damage Induced by Thermal Residual Stresses," Materials Science and Engineering, A252, pp. 117-132, 1998.

(70) M. Grujicic and G. B. Olson,"Dynamics of Martensitic Interfaces," Interface Science, 6, pp. 155-164, 1998.

(69) M. Grujicic and N. Sankaran, "Dispersed-phase Martensitic Transformation Controlled Deformation Behavior of Two-phase Metallic Materials," Inter. Journal Solids and Structures, 34, pp. 4421-4446, 1997.

(68) M. Grujicic, H. Zhao and G. L. Krasko, "Atomistic Simulation of Effect of Impurities S (111) Grain Boundary Fracture in Tungsten," Journal of Computer Aided Materials Design, 4, pp. 183-192, 1997.

(67) M. Grujicic, S.G. Lai and P. Gumbsch, "Atomistic Simulation Study of the Effect of Martensitic Transformation Volume Change on Crack-tip Material Evolution and Fracture Toughness," Materials Science and Engineering, A231, pp. 151-162, 1997.

(66) M. Grujicic, H. Zhao and G. L. Krasko, "Atomistic Simulation of S (111) Grain Boundary Fracture in Tungsten Containing Various Impurities on Fracture," International Journal of Refractory Metals and Hard Materials, 15, pp. 341-355, 1997.

(65) P. Dang and M. Grujicic, "The Effect of Crack-tip Material Evolution on Fracture Toughening - An Atomistic Simulation Study of the Ti-V System," Acta Materialia, 45, pp. 75-87, 1997.

(64) M. Grujicic and N. Sankaran, "Continuum Analysis of Dispersed-phase Martensitic Transformation Toughening of Two-phase Metallic Materials," Inter. Journal of Fracture, 83, pp. 337-358, 1997.

(63) M. Grujicic and P. Dang, "Martensitic Transformation in a Dispersed Ti-Al-V-Fe Beta Phase and Its Effect on Fracture Toughness of Gamma Titanium Aluminide," Mater. Sci. and Eng., A224, pp. 187-199, 1997.

(62) M. Grujicic and P. Dang, "A Molecular Dynamics Study of Transformation Toughening in the Gamma TiAl/Beta Ti-V System," Mater. Sci. and Eng., A219, pp. 109-125, 1996.

(61) P. Dang and M. Grujicic, "Transformation Toughening in the Gamma TiAl/Beta Ti-V System - Part II: A Molecular Dynamics Analysis," J. Mater. Sci., 32, pp. 4875-4887, 1997.

(60) M. Grujicic and P. Dang, "Transformation Toughening in the Gamma TiAl/Beta Ti-V System - Part I: A Finite Element Analysis of a Crack Touching the Interface," J. Mater. Sci., 32, pp. 4865-4874, 1997.

(59) J. Rawers and M. Grujicic, "Effects of Metal Composition and Temperature on the Yield Strength of Nitrogen Strengthened Stainless Steels," Mater. Sci. and. Eng., A207 pp. 188-194, 1996.

(58) P. Dang and M. Grujicic, "An Atomistic Simulation Study of the Effect of Crystal Defects on the Martensitic Transformation in Ti-V B.C.C. Alloys," Modeling and Simulation in Mater. Sci. and Eng., 4, pp. 123-136, 1996.

(57) P. Dang and M. Grujicic, “Atomistic Simulations of Transformation Toughening in Ti-V b.c.c. Beta Phase," Scripta Metall. et Mater., 35, pp. 59-64, 1996.

(56) M. Grujicic and W. S. Owen, "Models for Short Range Order in an F.C.C. Fe-Ni-Cr Alloy with a High Concentration of Nitrogen," Acta Metall. et Mater., 43, pp. 4201-4211, 1995.

(55) M. Grujicic and J. Du, "Atomistic Simulations of Transformation Toughening in Fe-Ni Austenite," Modeling and Simulation in Mater. Sci. and Eng., 3, pp.811-828, 1995.

(54) X. W. Zhou and M. Grujicic, “Tensile Testing and TEM Analysis of Nitrogen Strengthened Fe-Ni-Cr Single Crystals,” J. Mater. Science, 31, pp. 5373-5383, 1996.

(53) X. W. Zhou and M. Grujicic, "Thermodynamic Analysis of Short-Range Order Strengthening in Fe-Ni-Cr-N Austenite," Calphad, 20, pp. 257-272, 1996.

(52) M. Grujicic and P. Dang, "Atomic-Scale Analysis of Martensitic Transformation in Titanium with Vanadium - Part II: Molecular Dynamics Simulations," Mater. Sci. and. Eng., A205, pp. 153-165, 1996.

(51) M. Grujicic and P. Dang, "Atomic-Scale Analysis of Martensitic Transformation in Titanium with Vanadium - Part I: Verification of the EAM Potential," Mater. Sci. and. Eng., A205, pp. 139-152, 1996.

(50) M. Grujicic and P. Dang, "Molecular Dynamics/Embedded Atom Method Simulation of Crack-Tip Transformation Toughening in Fe-Ni Austenite," Mater. Sci. and Eng., A199, pp. 173-183, 1995.

(49) M. Grujicic and P. Dang, "Computer Simulations of Martensitic Transformation in Fe-Ni Face Centered Cubic Alloys," Mater. Sci. and Eng., A201, pp. 194-204, 1995.

(48) M. Grujicic, “The Effect of Nitrogen on the Structure and Mobility of Dislocations in Fe-Ni-Cr Austenites,” J. Mater. Sci., 30, pp. 5799-5807, 1995.

(47) G. N. Haidemenopoulos, M. Grujicic, G. B. Olson and M. Cohen, "Thermodynamics-based Alloy Design Criteria for Austenite Stabilization and Transformation Toughening in the Fe-Ni-Co System," Journal of Alloys and Compounds, 220, pp. 142-147, 1995.

(46) M. Grujicic and P. Dang, “Embedded Atom Model Analysis of the Relative Thermodynamic Stabilities of F.C.C. and B.C.C. Structures in Fe-Ni-Cr System,” Calphad, 19, pp. 105-117, 1995.

(45) M. Grujicic and P. Dang, "Assessment of Thermodynamic Properties of Alloys by Combining Embedded Atom and Quasiharmonic Methods," Calphad, 19, pp. 105-117, 1995.

(44) M. Grujicic and X. W. Zhou, "Atomistic Simulations of Thermally-Activated Glide of Dislocations in Fe-Ni-Cr-N Austenite," Mater. Sci. and Eng., A190, pp. 87-98, 1995.

(43) M. Grujicic, "The Core Structure of a/2<110> Screw Dislocations in Fe-Ni-Cr-N Austenite," Materials Science and Engineering, A183, pp. 223-232, 1994.

(42) M. Grujicic, "Embedded Atom/Monte Carlo Study of Short-range Order in Nitrogen Strengthened Fe-Ni-Cr Austenite," Materials Science and Engineering, A177, pp. 233-241, 1994.

(41) M. Grujicic, "An Analysis of the Isothermal Isobaric Chemical Vapor Infiltration of TiB2," Calphad, 18, No.1, pp. 81-88, 1994.

(40) Grujicic and X. W. Zhou, "Analysis of Fe-Ni-Cr-N Austenite Using the Embedded Atom Method," Calphad, 17, No.4, pp. 383-413, 1993.

(39) M. Grujicic and S. Arokiaraj, "Chemical Compatibility Between Zirconia Dispersion and Gamma Titanium Aluminide Matrix," Calphad, 17, No.2, pp 133-140, 1993.

(38) M. Grujicic, X. W. Zhou and W. S. Owen, " Monte Carlo Analysis of Short-Range Order and its Implication on Nitrogen Strengthening of Fe-Ni-Cr-N Austenitic Alloys," Mater. Sci. and Eng., A169, pp. 103-110, 1993.

(37) M. Grujicic, S. Tangrila, B. O. Cavin, W. D. Porter and C. R. Hubbard, "Effect of Iron Additions on Structure of Laves Phases in Nb-Cr-Fe Alloys," Materials Science and Engineering, A160, pp. 37-48, 1993.

(36) M. Grujicic and X. W. Zhou, "Application of Octahedron Tetrahedron Cluster Variational Method for Analysis of Short Range Order in Fe-Ni-Cr f.c.c. Alloys," Calphad, 16, No.3, 301-315, 1992.

(35) M. Grujicic and W. S. Owen, "A Chemical Interstitial Order- Base Model for Nitrogen Strengthening of Fe-Ni-Cr Austenite," Calphad, 16, No. 3, pp. 291-299, 1992.

(34) M. Grujicic and C. P. Narayan, "Effect of Iron Additions on Beta Phase Stability with Respect to Alpha-Martensite in V-28Al-17Ti, wt%," Materials Science and Engineering, A151, pp. 227-233, 1992.

(33) M. Grujicic and C. P. Narayan, "A Study of Beta-Alpha Martensitic Transformation Volume Change in Ti-Al-V Alloys," Materials Science and Engineering, A151, pp. 217-226, 1992.

(32) M. Grujicic, "Design of Ti-Al-V Beta Phase for Trans- formation Toughening of Gamma Titanium Aluminides," Materials Science and Engineering A154, pp. 75-78, 1992.

(31) H. M. Lee, S. M. Allen and M. Grujicic, “Coarsening Resistance of M2C Carbides in Secondary Hardening Steels: II. Alloy Design Aided by a Thermodynamic Database”, Metallurgical Transactions 22A, pp. 2869-2876, 1992.

(30) H. M. Lee, S. M. Allen and M. Grujicic, “Coarsening Resistance of M2C Carbides in Secondary Hardening Steels: I. Theoretical Model for Multi-component Coarsening Kinetics”, Metallurgical Transactions 22A, pp. 2863-2868, 1992.

(29) M. Grujicic and S. Tangrila, "Thermodynamic and Kinetic Analyses of Time-Temperature-Sensitization Diagrams In Austenitic Stainless Steels," Materials Science and Engineering, A142, pp. 255-259, 1991.

(28) M. Grujicic and C. P. Narayan, "Optimization of Ti-Al-V Beta Phase for Dispersed Phase Transformation Toughening of Gamma Titanium Aluminides," Calphad, 15, No. 2, pp. 173-178, 1991.

(27) M. Grujicic, "Design of M2C Carbides for Coarsening Resistance," Calphad, 15, No.2, pp. 179-184, 1991.

(26) M. Grujicic, “Implication of Elastic Coherency in Secondary Hardening of High Co-Ni Martensitic Steels”, Journal of Materials Science, 26, pp. 1357-1362, 1991.

(25) M. Grujicic and W. S. Owen, "The Low-Temperature Strengthening of Fe-Ni Invar," Scripta Metallurgica 24, pp. 2329- 2334, 1990.

(24) M. Grujicic, "Design of Precipitated Austenite for Dispersed- phase Transformation Toughening in High Strength Co-Ni Steels," Materials Science and Engineering, A128, pp. 201-207, 1990.

(23) M. Grujicic, "Stabilization of Precipitated Austenite in Tempered Fe-Mn-C Steel," Materials Science and Engineering, A127, pp. 79-84, 1990.

(22) M. Grujicic, "Thermodynamics Aided Design of High Co-Ni Secondary Hardening Steels," Calphad, 14, No.1, pp. 49-59, 1990.

(21) M. Grujicic, "Coherent Precipitation of M2C Carbides in AF1410 Steel," Materials Science and Engineering, A117, pp. 215-220, 1989.

(20) M. Grujicic, "The Use of the Gibbs Free Energy - Composition Diagrams in Coherent Solids," Calphad, 13, No.2, pp. 205-210, 1989.

(19) M. Grujicic, "A Treatment of Ferrite/M2C Coherent Phase Equilibrium in High Co-Ni Steels," Calphad, 13, No. 1, pp. 159-167, 1989.

(18) G. N. Haidemenopoulos, M. Grujicic, G. B. Olson and M. Cohen, "On the Optimization of Precipitated Austenite for Transformation Toughening of Steels," Calphad, 13, No. 3, pp. 215-223, 1989.

(17) R. R. Avillez, M. Grujicic and H. S. Furtado, "A Computer Calculation of the Niobium-Carbon Phase Diagram," Calphad, 13, No. 1, pp. 45-51, 1989.

(16) G. Haidemenopoulos, M. Grujicic, G. B. Olson and M. Cohen, "Transformation Microyielding of Retained Austenite," Acta Metall. 37, pp. 1677-1682, 1989.

(15) M. Gore, M. Grujicic and G. B. Olson, "Thermally Activated Grain Boundary Motion Through a Dispersion of Particles," Acta Metall., 37, pp. 2849-2854, 1989.

(14) M. Grujicic and G. Haidemenopoulos, "Treatment of Paraequilibrium Thermodynamics in an AF1410 Steel Using the Thermo-Calc Software and Database," Calphad, 12, No.3, pp. 219-224, 1988.

(13) M. Grujicic and G. B. Olson, "Ferrite-M2C Coherent Phase Equilibrium in an AF1410 Ultra-high Strength Steel," Calphad, 12, No.4, pp. 405-414, 1988.

(12) M. Grujicic, I. J. Wang and W. S. Owen, "On the Formation of Duplex Precipitate Phases in an Ultra-low Carbon Micro-alloyed Steel," Calphad 12, No 3, pp. 261-275, 1988.

(11) M. L. G. Byrnes, M. Grujicic and W. S. Owen, "Nitrogen Strengthening of a Stable Austenitic Stainless Steel," Acta Metallurgica, 35, No. 7, pp. 1853-1862, 1987.

(10) M. Grujicic, J. Megusar and T. Erturk, “Elastic Moduli, Yield Stress and Ductility of Fully-Crystallized Co84Nb10B6 Metallic Glass”, Int'l. J. Rapid Solid, 2, pp. 165-173, 1986.

(9) M. Grujicic, T. Erturk and W. S. Owen, "A Finite Element Analysis of the Effect of the Accommodation Strains in the Ferrite Phase on the Work Hardening of a Dual- Phase Steel," Materials Science and Engineering, 82, pp. 151-160, 1986.

(8) M. Grujicic, I. J. Wang and W. S. Owen, "Precipitate/Austenite Equilibrium in a Titanium-Niobium Ultra-low Carbon Steel," Calphad, 10, No. 2, pp. 117-128, 1986.

(7) M. Grujicic, L. Kaufman and W. S. Owen, "The (V, Nb)(C, N) Precipitate/Austenite Equilibrium in the Fe-C-N-V-Nb-Mn System," Calphad, 10, No. 1, pp. 37-47, 1986.

(6) M. Grujicic, G. B. Olson and W. S. Owen, “Mobility of the ?1-?1’ Martensitic Interface in Cu-Al-Ni. II. Model Calculations” Metall. Trans., 16A, pp. 1735-1744, 1985.

(5) M. Grujicic, G. B. Olson and W. S. Owen, “Mobility of the ?1-?1’ Martensitic Interface in Cu-Al-Ni. I. Experimental Measurements” Metall. Trans., 16A, pp. 1723-1734, 1985.

(4) M. Grujicic, G. B. Olson and W. S. Owen, “Mobility of Martensitic Interfaces”, Metall. Trans., 16A, pp. 1713-1722, 1985.

(3) M. Grujicic, A. M. Sarosiek, L. Kaufman and W. S. Owen, "The Carbonitride/ Austenite Equilibrium in Fe-(C+N)-V-Nb-Mn System," Calphad, 9, pp. 117-128, 1985.

(2) A. M. Sarosiek, M. Grujicic and W. S. Owen, "The Importance of the Heterogeneity of the Deformation in the Ferrite Phase of a Dual-Phase Steel," Scripta Metall., 18, No. 4, pp. 353-356, April, 1984.

(1) M. Grujicic and D. V. Drobjak, “Portevin Le-Chatelier Effect in an AlZn10 Alloy”, Bull. Chem. Soc. Belgrade, 43, No. 4, pp. 177-184, 1978.

R

Return to top

Conference Publications:

Return to top

Other Presentations: